Difference between revisions of "Software"

From TheAnalogThing
m (Minor fixes.)
Line 11: Line 11:
  
 
=== Web based oscilloscopes ===
 
=== Web based oscilloscopes ===
You can use https://anabrid.dev/webosci/ from any web modern browser. It will ask you for recording permission from your
+
You can use https://anabrid.dev/webosci/ from any recent web browser. You may be prompted to give permit recording from your sound card. Make sure you connect to the correct input and ''not'' to your webcam microphone, for instance.
sound card. Make sure you connect to the proper input and ''not'' to your webcam microphone, for instance.
 
  
''Known limitations'': Older versions of Safari, Firefox and Chrome do not support the relevant Web standards. In such
+
''Known limitations'': Older versions of Safari, Firefox and Chrome do not support the relevant Web standards. If this is the case for you, it may be best to look for an alternative.
a case, you should try out some other attempt.
 
  
 
Screenshot:
 
Screenshot:
Line 23: Line 21:
 
=== Native software oscilloscope for Linux: Xoscope ===
 
=== Native software oscilloscope for Linux: Xoscope ===
  
Xoscope is an advanced software oscilloscope for the Linux desktop, suitable for both
+
Xoscope is an advanced software oscilloscope for the Linux desktop, suitable for both notebook computers as well as the Raspberry Pi (Audio input). We have a detailed [[Xoscope|Installation guide for Xoscope on Linux]].
notbooks but also for running on the Raspberry Pi (Audio input). We have a detailed
 
[[Xoscope|Installation guide for Xoscope on Linux]].
 
  
 
''Known limitations'': Cannot display xy-plots.
 
''Known limitations'': Cannot display xy-plots.

Revision as of 06:27, 12 June 2021

A typical Chinch to jack adapter

Softscopes

What follows is a curated list of Software oscilloscopes. The idea is always that you can connect your Analog Thing to your Soundcard input with a simple Chinch-to-jack adapter, such as depicted in the right. This allows to connect to the 3,5mm phone connector (Klinke) which is still present in many Notebooks, Tablets, Smartphones, also for many system-on-chips such as the Raspberry Pi. If your system does no more have such an input, there may be cheap adapters to USB (they are usually called USB soundcard).

Note that a single chinch socket has to pins: One for ground, one for the signal. This puts it on equal footing with a BNC connector or a mono phone connector. The adapter shown on the right joins two outputs together to a stereo sound signal.

Web based oscilloscopes

You can use https://anabrid.dev/webosci/ from any recent web browser. You may be prompted to give permit recording from your sound card. Make sure you connect to the correct input and not to your webcam microphone, for instance.

Known limitations: Older versions of Safari, Firefox and Chrome do not support the relevant Web standards. If this is the case for you, it may be best to look for an alternative.

Screenshot:

Webscope Screenshot.png

Native software oscilloscope for Linux: Xoscope

Xoscope is an advanced software oscilloscope for the Linux desktop, suitable for both notebook computers as well as the Raspberry Pi (Audio input). We have a detailed Installation guide for Xoscope on Linux.

Known limitations: Cannot display xy-plots.

Screenshot:

Xoscope Screenshot.png