Difference between revisions of "Oscilloscope"
m (Sven moved page Oscilloscopes to Oscilloscope) |
(Added FNIRSI 1014D DSO) |
||
| (5 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
| − | An '''Oscilloscope''' is an essential measurement device when doing analog computing. Nevertheless, even cheap entry level devices cost more | + | An '''Oscilloscope''' is an essential measurement device when doing analog computing. Nevertheless, even cheap entry level devices cost more than 200 EUR. This page shall document how to use oscilloscopes with [[THAT]] and gives recommendations about devices that are suitable for working with [[The Analog Thing]]. If you don't want to spend money on an oscilloscope, a [[Software Oscilloscope]] maybe an alternative. |
| − | == | + | == Using Oscilloscopes == |
| + | To watch and measure the values and curves produced during an analog computation or simulation you need additional instruments. The Analog Thing contains a [[voltmeter]] as instrument to setup the coordinates or OP_TIME values. Depending on the [[modes|mode of operation]] in '''REP''' with predefined operation time or '''OP''' with infinite operation this display may be useful for static or slow moving values only. | ||
| + | |||
| + | [[Image:DSO_Yt_display.png|thumb|typical Yt display of signals on a DSO]] | ||
| + | To measure faster events or display signal curves the best tool is an '''oscilloscope'''. For longer operation times (REP, 0.1-10s) a digital storage oscilloscope (DSO) is preferred rather than an analog oscilloscope with a cathode ray tube (CRT). These DSO did get cheaper in the last years but useful DSO's with minimum 2 channels and XY mode are in the price range of about 150-300 € up. XY mode is useful for many applications and allow a better view of complex signals than displaying them just over the time in Yt mode. The typical Lissajous figures for example require the XY mode. | ||
| + | |||
| + | [[Image:DSO_XY_display.png|thumb|typical XY display of the same signals above]] | ||
| + | There are low cost oscilloscope on the market as well in the range of 40-100 € but these come with missing features and have mostly only one channel to display like DSO 138 or missing XY mode like DS 212/213. This is only partly useful with analog computations or simulations and all theses cheap handhelds have only a very small display. Some low cost oscilloscopes come without a display and are connected to a computer as display by software. | ||
| + | |||
| + | == Requirements for Oscilloscopes with The Analog Thing == | ||
| + | [[File:Hantek IMG 0413.jpg|thumb|A nice entry level DSO: [[Hantek USB DSO]]]] | ||
| + | === Minimum requirements (cheap devices) === | ||
| + | * analog oscilloscope with CRT display or software display while connected to computer | ||
| + | * 1 or 2 channels | ||
| + | * XY display mode | ||
| + | * 100 kHz bandwith | ||
| + | |||
| + | Recommendations: | ||
| + | * [[Hantek USB DSO]] (79€ entry price) | ||
| + | * [https://www.meilhaus.de/picoscope-2000.htm Picoscope] (125€ entry price) | ||
| + | * [https://store.digilentinc.com/analog-discovery-2-100msps-usb-oscilloscope-logic-analyzer-and-variable-power-supply/ Analog Discovery 2] (280€ for academic) | ||
| + | * [https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/adalm2000.html#eb-overview ADMAL2000] | ||
| + | |||
| + | Further cheap alternatives: | ||
* HS101 http://hscope.martinloren.com/HS101-oscilloscope.html | * HS101 http://hscope.martinloren.com/HS101-oscilloscope.html | ||
* DroidOscillo https://hackaday.io/project/26360-android-oscilloscope-droidoscillo | * DroidOscillo https://hackaday.io/project/26360-android-oscilloscope-droidoscillo | ||
* DSO-138 https://www.reichelt.de/dso-138-oszilloskop-1-kanal-200-khz-12-bit-joy-it-dso-138-p209775.html?&trstct=pol_0&nbc=1 | * DSO-138 https://www.reichelt.de/dso-138-oszilloskop-1-kanal-200-khz-12-bit-joy-it-dso-138-p209775.html?&trstct=pol_0&nbc=1 | ||
* SmartScope https://www.kickstarter.com/projects/751733865/smartscope-reinventing-the-oscilloscope | * SmartScope https://www.kickstarter.com/projects/751733865/smartscope-reinventing-the-oscilloscope | ||
| + | * FNIRSI 1014D DSO https://www.youtube.com/watch?v=yQKuHJELEOs | ||
| + | |||
| + | === Medium requirements === | ||
| + | * 4 channels or separate trigger input | ||
| + | * DSO type (digital storage) | ||
| + | |||
| + | Recommendations: | ||
| + | * [https://www.meilhaus.de/siglent-sds1000x-e.htm Siglent SDS1000X-E] (about 400€) | ||
| + | |||
| + | == Alternatives == | ||
| + | A cheap alternative for beginners with low budget is to use a [[Software_Oscilloscopes|Software Oscilloscope]]. These solutions rely on your computer for all of the data processing and use a secondary device (such as an Arduino or sound card) for data acquisition. | ||
| + | |||
| + | [[Category:Hardware]] | ||
Latest revision as of 01:39, 26 December 2023
An Oscilloscope is an essential measurement device when doing analog computing. Nevertheless, even cheap entry level devices cost more than 200 EUR. This page shall document how to use oscilloscopes with THAT and gives recommendations about devices that are suitable for working with The Analog Thing. If you don't want to spend money on an oscilloscope, a Software Oscilloscope maybe an alternative.
Using Oscilloscopes
To watch and measure the values and curves produced during an analog computation or simulation you need additional instruments. The Analog Thing contains a voltmeter as instrument to setup the coordinates or OP_TIME values. Depending on the mode of operation in REP with predefined operation time or OP with infinite operation this display may be useful for static or slow moving values only.
To measure faster events or display signal curves the best tool is an oscilloscope. For longer operation times (REP, 0.1-10s) a digital storage oscilloscope (DSO) is preferred rather than an analog oscilloscope with a cathode ray tube (CRT). These DSO did get cheaper in the last years but useful DSO's with minimum 2 channels and XY mode are in the price range of about 150-300 € up. XY mode is useful for many applications and allow a better view of complex signals than displaying them just over the time in Yt mode. The typical Lissajous figures for example require the XY mode.
There are low cost oscilloscope on the market as well in the range of 40-100 € but these come with missing features and have mostly only one channel to display like DSO 138 or missing XY mode like DS 212/213. This is only partly useful with analog computations or simulations and all theses cheap handhelds have only a very small display. Some low cost oscilloscopes come without a display and are connected to a computer as display by software.
Requirements for Oscilloscopes with The Analog Thing
Minimum requirements (cheap devices)
- analog oscilloscope with CRT display or software display while connected to computer
- 1 or 2 channels
- XY display mode
- 100 kHz bandwith
Recommendations:
- Hantek USB DSO (79€ entry price)
- Picoscope (125€ entry price)
- Analog Discovery 2 (280€ for academic)
- ADMAL2000
Further cheap alternatives:
- HS101 http://hscope.martinloren.com/HS101-oscilloscope.html
- DroidOscillo https://hackaday.io/project/26360-android-oscilloscope-droidoscillo
- DSO-138 https://www.reichelt.de/dso-138-oszilloskop-1-kanal-200-khz-12-bit-joy-it-dso-138-p209775.html?&trstct=pol_0&nbc=1
- SmartScope https://www.kickstarter.com/projects/751733865/smartscope-reinventing-the-oscilloscope
- FNIRSI 1014D DSO https://www.youtube.com/watch?v=yQKuHJELEOs
Medium requirements
- 4 channels or separate trigger input
- DSO type (digital storage)
Recommendations:
- Siglent SDS1000X-E (about 400€)
Alternatives
A cheap alternative for beginners with low budget is to use a Software Oscilloscope. These solutions rely on your computer for all of the data processing and use a secondary device (such as an Arduino or sound card) for data acquisition.
