Damped oscillation

The modeling of a damped oscillation is a good starting point for analog programming beginners. This article shall give a detailed explanation how to implement a simulation on The Analog Thing using the full repatriation method to derive a computer circuit (originally developed by Lord Kelvin around 1875) and to get results on an oscilloscope.

There are four major steps, all of which are equally crucial:

1. Describe the to be simulated system with differential equations
2. Derive a computer circuit from these equations
3. Wire the computer circuit on the analog computer and adjust parameters
4. Choose viable visualization method (usually oscilloscopes) and connect the computer circuit

This article will focus on point 2. to 4. and requires a basic understanding of differential equations.

1. Mathematical description of a damped oscillation

The first and often hardest step of modeling a to be simulated system on an analog computer is to give an exact mathematical description of the system in the form of differential equations. For this example the description is rather short:

Find all acting forces, three in this case:

  - Spring  force Fs = k*x;
    k = spring coefficient, x = deflection
  - Inertia force Fm = m*a;
    m = mass, a = acceleration
  - Damper  force Fd = d*v;
    d = damper coefficient, v = velocity

Set the sum of all forces to zero (definition of an isolated system):

  Fm  + Fd  + Fs  = 0
  m*a + d*v + k*x = 0

Replace the velocity v with ẋ and the acceleration a with ẍ

  v = ẋ
(the velocity equals the first derivative of x)
  a = ẍ
(the acceleration equals the second derivative of x)
    m*a + d*v + k*x 
  = m*ẍ + d*ẋ + k*x = 0

Now we have an exact description the damped oscillation in the form of a differential equation.

Lastly, solve this equation for the highest derivative the finish the full repatriation:

-> ẍ = -(d*ẋ + k*x) / m

2. Derivation of a computer circuit

At first, we need three basic computing elements which can probably be found on every electrical analog computer:

Description	Circuit
The coefficient potentiometer, which is used to to multiply an input x with the factor a so a*x is generated. Note: a can only accept values between 0 and 1! Can also be used as dividing factor so a/x is generated.	Coefficient potentiometer Scheme
The inverter // summer, the input (or inputs) can be found on the left and the output on the right. Note: Due to technical reasons the output of a summer is negated! x+y --> -(x+y) At the basis of the output inversion a summer with one input functions as inverter and therefore the summer and the inverter share the same circuit symbol.	Basic Summer Scheme Basic Inverter Scheme
The integrator, the input (or inputs) can be found on the left and the output on the right. Coming from above you find ẍ0, which represents the starting condition of the integrator and can be thought of as the integration constant. Note: Due to technical reasons the output of an integrator is negated! ẍ -->-ẋ Electrical analog integrators can only integrate over time.	Basic Integrator Scheme
When putting two integrators together, you can generate ẋ and x	Generating all derivatives
Lala	Example
Example	Example