Integrator

An Integrator is an elementary building block of an analog computer which carries out an Integration in time, as in c = integral_0^t integrand(t') dt'. The Analog Thing ships five integrators. That menas you can compute five integrals in a circuit.

Analog computers typically typically perform integration by charging and discharging capacitors. The key difference between an integrator and a summer is the capacity in the feedback channel instead of a simple resistance. Accordingly, all integrators are also summing their inputs. For more details, please refer to Analog computing literature.

Basic Usage of an Integrator on The Analog Thing

A single integrator

• Circles represent inputs, triangles represent outputs
• Analog integrators sum their inputs. That is, if you have a sum under your integral, you can save a single summer before the integrator. Otherwise, just put your integrand into the upper left input labeled with 1.
• There are two output slots. Just use one of them as you like.
• The IC slot stands for initial conditions. It is an input where you have to provide suitable initial conditions. As shorthands, -1 and +1 are right to the hand. If this slot is left empty, 0 is taken as initial condition.
• Beginners may ignore the slots SJ and SLOW.

Attention: Make sure the sum of your inputs does not exceed the machine unit (±10V), otherwise an overload will occur (indicated by the OL LED) . See Logic levels for details.

Extended Usage of an Integrator

This section is still under construction! write this section

Changing the integration speed

Internal wiring and effect of slowing down integrator.

You can change the integration time scale factor k0 of a particular integrator by connecting SLOW to OUT. The circuit from the right actually stems from File:Anathing v1.0 base 3.pdf. By slowing down, you effectively decrease the k0 by factor 100.

Making use of the Summing junction

See also XIR.

Mathematics about analog integration

This section is still under construction! write this section