Difference between revisions of "Software"
m (Minor fixes.) |
m (Minor fix.) |
||
| Line 1: | Line 1: | ||
[[Image:Jack.jpg|thumb|A chinch to stereo jack adapter cable]] | [[Image:Jack.jpg|thumb|A chinch to stereo jack adapter cable]] | ||
== Softscopes == | == Softscopes == | ||
| − | What follows is a curated list of '''Software oscilloscopes'''. The idea is always that you can connect your [[Analog Thing]] to your [[Soundcard]] input with a simple Chinch-to-jack adapter, such as depicted in the right. This allows to connect to the 3.5mm phone connector (''Klinke'') which is still present in many notebooks, tablets, smartphones, also for many singel board systems such as the [[Raspberry Pi]]. If your system does not have such an input, you may use a USB adapter (often referred to as ''USB sound card''). | + | What follows is a curated list of '''Software oscilloscopes'''. The idea is always that you can connect your [[Analog Thing]] to your [[Soundcard]] input with a simple Chinch-to-jack adapter, such as depicted in the right. This allows to connect to the 3.5mm phone connector (German: ''Klinke'') which is still present in many notebooks, tablets, smartphones, also for many singel board systems such as the [[Raspberry Pi]]. If your system does not have such an input, you may use a USB adapter (often referred to as ''USB sound card''). |
Note that a single chinch socket has to pins: One for ground, one for the signal. This puts it on equal footing with a BNC connector or a ''mono'' phone connector. The adapter shown on the right joins two outputs together to a ''stereo'' sound signal. | Note that a single chinch socket has to pins: One for ground, one for the signal. This puts it on equal footing with a BNC connector or a ''mono'' phone connector. The adapter shown on the right joins two outputs together to a ''stereo'' sound signal. | ||
Revision as of 06:31, 12 June 2021
Softscopes
What follows is a curated list of Software oscilloscopes. The idea is always that you can connect your Analog Thing to your Soundcard input with a simple Chinch-to-jack adapter, such as depicted in the right. This allows to connect to the 3.5mm phone connector (German: Klinke) which is still present in many notebooks, tablets, smartphones, also for many singel board systems such as the Raspberry Pi. If your system does not have such an input, you may use a USB adapter (often referred to as USB sound card).
Note that a single chinch socket has to pins: One for ground, one for the signal. This puts it on equal footing with a BNC connector or a mono phone connector. The adapter shown on the right joins two outputs together to a stereo sound signal.
Web based oscilloscopes
You can use https://anabrid.dev/webosci/ from any recent web browser. You may be prompted to give permit recording from your sound card. Make sure you connect to the correct input and not to your webcam microphone, for instance.
Known limitations: Older versions of Safari, Firefox and Chrome do not support the relevant Web standards. If this is the case for you, it may be best to look for an alternative.
Screenshot:
Native software oscilloscope for Linux: Xoscope
Xoscope is an advanced software oscilloscope for the Linux desktop, suitable for both notebook computers as well as the Raspberry Pi (Audio input). We have a detailed Installation guide for Xoscope on Linux.
Known limitations: Cannot display xy-plots.
Screenshot:
